If you have one of those days where you’re just getting started, you could be happy with a little carpet cleaning. But if you are not, you’re going to spend your time looking up the color on one of the most important aspects of the carpet cleaning routine: the moisture barrier. This is where you get stuck. I don’t know if it’s a good thing or if it’s just time to get up and clean before you finish.
The problem is that you only know when youve gotten the job done. It can be easy to get distracted. While you are in the process of cleaning, you can use the same color on the carpet that you are cleaning to indicate whether you are done or not. The problem is that you are now stuck on a color that is always the same.
Sometimes when you are trying to clean a particular spot of carpet, you might want to use the wrong color. While you are cleaning, if you are using blue, you might be thinking blue color is a good color for the spot, but if you are using brown, you will be able to see that the spot is actually brown. It is also easy to get distracted because you are in the process of cleaning while you are thinking about the color you are using.
One of the biggest pet peeves of those of us who like to color, is seeing the same color every time we look at the carpet. It is annoying when you are cleaning a carpet and your mind drifts to another color and you end up accidentally using the wrong color. Just like we are always thinking about how we want to color our carpet, we usually don’t realize that we are unconsciously using the same color over and over in our minds, which we need to fix.
In the new “gears of war” video from developer Arkane Studios we are shown a couple of different ways for your carpet to change color, and in each case it is a little different from the one we are already using. The first is the more subtle way to do it, which is to use a lighter colored carpet setting, and then change the color to dark when you need to.
This is the more complicated way to do it, because it involves more steps and the use of a carpet dye and a different room than what we have at our house. It is more difficult to do because there are so many different colors that need to be matched by the carpet dye. If we used the same coloring every time we wanted to change the color, it would be very time consuming.
It’s a bit of a pain in the ass. We don’t have the luxury of going to Target every time we need to change the color. With this method, you have to go to Target, get a bag of carpet dye, and put the dye in a bag. Then you have to go back to your room and wait for it to start. You have to take the carpet dye out of the bag and put it into the dye bath.
You also have to wait for the carpet dye to dry before you can begin the new color. Because the carpet dye can take days to dry, we are using a carpet steam cleaner. Which is a little better because all the steam can really kill germs on your carpet, but it is also a bit more expensive than the dye.
Sounds like another DIY project that will be interesting to watch, right? Apparently there’s a few advantages to carpet steaming that you may not expect. The carpet is treated with a super-active and extremely quick-drying (read: non-toxic) agent. That means that it’s not just steam it’s actually cleaned out, rinsed, and re-treated.
If you don’t believe me, I can show you a picture of the carpet steamer I use on my house. It’s pretty amazing, and I am always surprised by how well it works.